Two-Port Building Automation Gateway
What do you need help with?
Why are MMS Reports not working?
If MMS reports are not working with a ProSoft IEC 61850 client gateway please review the following points, as the most common reasons are listed below: 1.Mismatch between the IEC 61850 client
Read moreIssue importing ICD device template file into the 61850 Configuration manager
to look at. 1) The configuration tool accepts only configured IED files such as .CID and .SCD files. The only reason that the configuration tool allows the importing of an .ICD file is that some
Read moreWhere can I get firmware for ProSoft products?
Firmware upgrades for Industrial Radios or AN-X(2) gateways can be found by navigating to the appropriate product on the following web page: http
Read moreHow do I completely remove a ProSoft Add-On Instruction (AOI) from a RSLogix5000 project?
order: 1. Delete the ProSoft card from the I/O configuration in Slot X. 2. Delete the ProSoft AOI rung from the logic. 3. In the Controller Tags, click on the bottom tab 'Edit Tags'. Delete
Read moreDNspector Frequently Asked Questions
1. What is DNspector and why should I consider purchasing it? DNspector was created to provide a low cost CAN monitor, primarily used by engineers and installation technicians to allow
Read more