- Solutions
- Productos
- SERVICIOS Y SOPORTE
-
NOVEDADES Y EVENTOS
- ProSoft Insights (Blog)
-
Podcast
Knowledge Base / Wireless
Frequency Hopper Radio
Search KB
Categories
Browse Categories
Can I use the RLX-FHES Radio Modem to connect two serial devices over an EtherNet network?
This is sometimes referred to as serial "tunneling" - where serial data packets from a serial device are embedded in a TCP/IP packet and transmitted through the EtherNet infrastructure (wired or wireless) to another serial device, where the radio (vs. virtual com port s...
Read moreWhat is the Mean Time Between Failure (MTBF) for the RLX-FHS modules?
The MTBF for the RLX-FHS module line is 763,471hours. ...
Read moreWhat is the Mean Time Between Failure (MTBF) for the RLX-FHE and RLX-FHES modules?
All RLX-FHE modules all RLX-FHES modules the MTBF for the RLX-FHE and RLX-FHES module lines is 616,701 hours....
Read moreMy RSSI values do not seem to be accurate beyond a -60dBM signal in my RLX-IFH9E/RLXIFH24E radio. Why?
Due to the design and physical limitations of the RLX-IFH9E and RLX-IFH24E radios, any RSSI values reported that are greater than -60dBm is not accurate. These values cannot be compared to provide a meaningful status of the signal level. For example, an RSS...
Read moreWhat is the Mean Time Between Failure (MBTF) for the RLX2-IFH9E?
The Mean Time Between Failure (MBTF) for the RLX2-IFH9E is 1,340,280 Hours....
Read moreWhat is the Mean Time Between Failure (MBTF) for the RLX2-IFH24E?
The Mean Time Between Failure (MBTF) for the RLX2-IFH24E is 1,059,960 Hours....
Read moreIs the RLX-IFH9S compatible with the RLX-IFH9E?
These radios are not compatible. The RLX-IFH9S is configured via Serial The RLX-IFH9E is configured via EthernetYou cannot mix the Serial and Ethernet radios together in a network....
Read moreWhat kind of radio frequencies does ProSoft offer?
ProSoft offers 900MHz, 2.4GHz, 5GHz, and Cellular (GSM/CDMA) frequency solutions...
Read more