PROFIBUS DPV1 Master/Slave for ControlLogix®
ILX56-PBM
The ILX56-PBM PROFIBUS DPV1 Master/Multi-Slave module allows Rockwell Automation® ControlLogix® processors to communicate with various PLCs and devices using the PROFIBUS DP protocol. As a PROFIBUS DP Master, the module can transfer up to 5000 bytes of cyclic I/O data with various slave devices on the network.
Or you can use the module as a PROFIBUS DP multi-slave, where the module can emulate up to 10 individual nodes on a PROFIBUS DP network, allowing for more cyclic I/O data transfer.
With the ILX56-PBM module, ControlLogix® processors can easily communicate with devices supporting PROFIBUS DPV0 and DPV1 protocol. And through premier integration tools such as a custom Add-On Profile, project-specific Add-On Routines, and advanced tools such as PROFIBUS DP packet capture utility, you can minimize the time required to get a PROFIBUS DP network configured in a ControlLogix® environment.
In addition, with the use of multiple I/O connections back to the ControlLogix® processor, this module provides data update rates that will meet even the most demanding applications.
Imágenes
|
|
Características y Beneficios
- AOP and AOI: Module communication is integrated within Studio/RSLogix™ 5000 using a sample Add-On Instruction (AOI), and custom configuration utility created Add-On Routines to reduce commissioning time.
- Autoscan: The Autoscan feature reduces startup times and simplifies troubleshooting by scanning the PROFIBUS network and uploading slave device addresses and configuration information. (Reads and maps nodes automatically to the module.)
- ComDTM: Allows remote Ethernet connectivity with Asset Management Software, significantly lowering maintenance costs. You can configure, commission, maintain and diagnose your fieldbus devices throughout their entire lifecycle with this comprehensive, fully integrated engineering and maintenance environment.
- SD card slot (SD card optional) is used for storing configuration files in the event of a disaster.
- Redundancy: Two modules can be used along with the custom Add-On Routine to allow for a redundant PROFIBUS DP network for high availability systems.
Especificaciones
PROFIBUS DP Master Specifications
Hardware
| Specification |
Description |
| PROFIBUS Interface |
RS-485, Max. 12 Mbps, potential free, according EN 50170 |
| Power Supply |
450 mA @ 5Vdc, 2 mA @ 24 Vdc |
| Dimensions |
Standard 1756 Single-slot module |
| Burst |
EN 61000-4-4, 2 kV, 5 kHz |
| Surge |
EN 61000-4-5, 2 kV common mode, 1 kV differential mode |
| ESD |
EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect |
| Radiated/Conducted Immunity |
EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1 kHz sine wave |
| Radiated/Conducted Emission |
EN 55011 Class A |
| Vibration/Shock (operating) |
IEC 600068-2-6, 10-500 Hz, ± 0,75 mm, ± 2 g, 1 Octave/min IEC 600068-2-27, 30 g, 11 ms |
| Operating Temperature |
0°C to 60°C (32°F to 140°F) |
| Relative Humidity |
5 to 95% (non-condensing) |
Certificaciones
| ATEX Letter of Conformity | 101,65 kB | Última Modificación 12.05.2022 |
| CB Safety | 335,02 kB | Última Modificación 03.04.2020 |
| Declaration of Conformity (RoHS/CE) | 547,35 kB | Última Modificación 18.12.2020 |
| UL/cUL; Class 1, Div. 2 | 84,59 kB | Última Modificación 03.04.2020 |
| Declaration of REACH Compliance | 341,18 kB | Última Modificación 08.02.2021 |
| Country Approval - Korea - KC Registration | 281,11 kB | Última Modificación 18.03.2022 |
| Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1,92 MB | Última Modificación 10.07.2020 |