Two-Port Building Automation Gateway
What do you need help with?
Does the AN-X(2)-GENI gateway work with VersaMax I/O?
Yes the AN-X(2)-GENI gateway supports standard digital and analog I/O modules that are in a chassis with a VersaMax Network Interface. ... VersaMax, GE Genius Bus, AN-X2-GENI, ... Does the AN-X(2)-GENI gateway work with VersaMax I/O?
Read moreWhy am I getting: Download was successful but Module failed to reboot in 60 seconds
. If we don't have a backplane connection, this will result in the "download was sucessful but module failed to reboot" error. Common causes include: 1) Your Compact Logix is not in run mode. 2) Your
Read moreWhich firmware should I use for a DH+ PLC to an EtherNet/IP HMI
If you intend to use an AN-X2-AB-DHRIO to connect anything, including an HMI, on EtherNet/IP to something on Data Highway Plus, you will be using the DHP firmware. The HMI firmware is for use only
Read moreDoes the AN-X(2)-AB-DHRIO gateway running the RIO HMI firmware support multiple block transfers to the same Rack, Group, and Slot?
, Group, and Slot Number, it is necessary to add the BtByLen keyword into the configuration file as follows:RioCfg, ; start of configurationBaud,115k2, ;define baud rate for 1771 IO network (57k6,115k2,230k ... BTRs, BTWs, block transfers, RIO,HMI, AN-X2-AB-DHRIO, BtByLen, overloaded block transfers,dhrio,an-x2, an-x ... Does the AN-X(2)-AB-DHRIO gateway running the RIO HMI firmware support multiple block transfers to the same Rack, Group, and Slot?
Read moreWhat OPC Servers will work with the AN-X(2)-AB-DHRIO gateway running the DH+ firmware?
There are several OPC servers that have been tested or are known to work through the AN-X(2)-AB-DHRIO running the DH+ bridge firmware: RSLinx Classic using the Ethernet Devices driver Wonderware ... AN-X2-AB-DHRIO, OPC server, DHP, DH+, ... What OPC Servers will work with the AN-X(2)-AB-DHRIO gateway running the DH+ firmware?
Read more