QuickServer, LonWorks, Ethernet, BACNET,

EtherNet/IP or DF1 to LonWorks QuickServer Gateways

PS-QS-1x11-0783

The QuickServer line of communication gateways are designed to link building automation driven networks with industrial control networks. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.

Características y Beneficios

  • Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • DIN rail mount included with gateway
  • DIP switches to select baud rate or node ID on the fly
  • BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)

Especificaciones

 Field Connections

  • Ethernet 10/100 RJ45
  • Serial RS-485 terminal (up to 115K baud)
  • FTT-10 LonWorks port

Hardware

Environment

  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

 

Power Requirements

  • 9 to 30 VDC or 12 to 24 VAC
  • Current draw 250mA @ 12Vdc

 

Other

  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

 

Physical Dimensions (W x D x H)

  • 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)

Descargas

QuickServer Setup Guide 2,84 MB Última Modificación 27.07.2020
SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) 17,04 MB Última Modificación 12.09.2015
PS-QS-1x11-0783 Datasheet 295,83 kB Última Modificación 28.10.2020
FieldServer Toolbox Setup 12,05 MB Última Modificación 27.07.2020
Protocol Driver and Configuration Manual PS-QS-1x10-0783 5,15 MB Última Modificación 04.11.2020

Certificaciones

Declaration of Conformity (RoHS\CE) 426,18 kB Última Modificación 17.12.2020
Declaration of REACH Compliance 593,33 kB Última Modificación 17.12.2020