The PROFINET device to Modbus Serial gateway offers bi-directional data transfers between a PROFINET Controller and Modbus serial (RTU and ASCII) devices. The serial port can be configured as either a Modbus master or slave. The PROFINET interface operates as a PROFINET device (slave).
The PLX31-PND-MBS gateway is a stand-alone DIN-rail mounted unit that provides Ethernet connectivity for network communications, remote configuration, and diagnostics. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup.
Specification |
Description |
Driver Type |
Class A Device |
PROFINET I/O Data |
1440 bytes IN, 1440 bytes OUT |
Exchange Types |
Cyclic Real-time (RT) and Acyclic Data |
Command List |
Up to 100 commands, each fully configurable for Function Code, slave address, register to/from addressing and word/bit count. |
||
Supported Modbus Function Codes |
1: Read Coil Status 2: Read Input Status 3: Read Holding Registers 4: Read Input Registers 5: Force (Write) Single Coil 6: Preset (Write) Single Holding Register |
15: Force (Write) Multiple Coils 16: Preset (Write) Multiple Holding Registers 22: Mask Write Holding Register (slave only) 23: Read/Write Holding Registers (slave only) |
|
Software configurable communication parameters |
Baud rate: 110 baud to 115.2 kbps
Parity: None, Even, Odd RTS on/off delay: 0 to 65535 milliseconds Modbus Modes: RTU with CRC-16, ASCII mode with LRC error checking Floating Point Data supported, support for Enron and Daniel |
||
Polling of Command List |
Configurable polling of command list, including continuous and on change of data |
||
Status Data |
Error codes available on an individual command basis. In addition, a slave status list is maintained |
||
Node Address |
1 to 247 (software selectable) |
||
RS Interface |
RS232, RS422, and RS485 |
||
|
|
|
|
Specification |
Description |
Power Supply |
24 VDC nominal |
Current Load |
24 VDC nominal @ 300 mA 10 to 36 VDC @ 610 mA maximum |
Operating Temperature |
-25°C to 70°C (-13°F to 158°F ) |
Storage Temperature |
-40°C to 80°C (-40°F to 176°F ) |
Relative Humidity |
5% to 95% RH with no condensation |
Shock |
IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational) IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational) |
Vibration |
IEC 60068-2-6; 5G @ 10 to 150 Hz |
Dimensions |
5.38 x 1.99 x 4.38 in, 13.67 x 5.05 x 11.13 cm (H x W x D) |
LED Indicators |
For configuration and protocol status errors |
Ethernet Port
|
*10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 |
Number of Serial Ports |
1 |
Shipped With Each Unit |
2.5 mm screwdriver, J180 Power Connector, DB9 to Screw Terminal Adapter |
ATEX Letter of Conformity | 107,32 kB | Última Modificación 12.05.2022 |
CB Safety | 348,30 kB | Última Modificación 20.10.2022 |
Korean KC Registration | 974,32 kB | Última Modificación 07.07.2020 |
Profibus/Profinet Certificate | 326,63 kB | Última Modificación 22.05.2015 |
Declaration of Conformity (RoHS/CE) | 114,24 kB | Última Modificación 01.06.2022 |
Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1,92 MB | Última Modificación 10.07.2020 |
UL Certificate of Compliance | 233,35 kB | Última Modificación 16.11.2022 |