DF1 Messaging Module
PLX51-DF1-MSG
The DF1 messaging module can be used in applications requiring DF1 to Logix messaging. The module can be used to communicate between PC’s or PLC’s using DF1™ or EtherNet/IP™.
Have a bunch of MicroLogix or SLC’s in your water or waste water treatment facility? DF1 Radio Modem protocol can be used for migrating old SLC’s and MicroLogix PLC’s to newer Logix based platforms over leased line modems. Start migrating the legacy equipment to new Logix based equipment with the help of ProSoft Technology’s DF1 Messaging Module.
Imágenes
|
|
|
|
Características y Beneficios
- DF1 Radio Modem with support for store and forward functions
- Intelligent routing to ControlLogix® or CompactLogix™ from PLC-5®, SLC, MicroLogix controllers and SCADA systems
- Direct-to-tag technology simplifies data mapping, reducing configuration time
- Secure module configuration via on module switch
- Can be used in a redundant ControlLogix system
- Built-in packet analyzer for DF1 networks
Especificaciones
| EtherNet/IP |
Description |
| Connector |
RJ45 |
| Conductors |
CAT5 STP/UTP |
| ARP Connections |
Max 20 |
| TCP Connections |
Max 20 |
| CIP Connections |
Max 10 |
| Communication Rate |
10/100 Mbps |
| Duplex Mode |
Full / Half / Auto-Negotiate |
| Auto MDIX |
Yes |
|
|
|
| DF1 |
Description |
| Protocol |
DF1 Full Duplex, DF1 Half Duplex, DF1 Radio Modem |
| Baud Rates |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
| Parity |
None, Even, Odd |
| Data Bits |
8 |
| Stop Bits |
1 |
| Error Detection |
CRC, BCC |
| Embedded Response |
Auto, On |
| Bridge Mode Mapping |
Max 20 routes |
| Slave Mode Mapping |
Max 20 routes |
| Slave Mode Message Support |
PLC-5 Typed Read, PLC-5 Typed Write, SLC Typed Read, SLC Typed Write, PLC-2 Unprotected Read, PLC-2 Unprotected Write, PLC-2 Unprotected Bit Write |
| Scheduled Tag Mode Message Support (Master) |
PLC-5 Typed Read, PLC-5 Typed Write, SLC Typed Read, SLC Typed Write |
Hardware
| Specification |
Description |
| Enclosure |
Plastic |
| Enclosure Rating |
IP20, NEMA/UL Open Type |
| Dimensions (H x W x D) |
101.0 x 22.5 x 120.0 mm |
| Power Requirements |
Input: 10 to 28 VDC, (70 mA @ 24 VDC / 130 mA @ 10 VDC) |
| Power Consumption |
1.7 W |
| Power Connector |
3-way terminal |
| Conductors |
24 to 18 AWG |
| Temperature |
-20°C to 70°C |
| Earth Connection |
Yes, terminal based |
| Emissions |
IEC61000-6-4 |
| ESD Immunity |
EN 61000-4-2 |
| Radiated RF Immunity |
IEC 61000-4-3 |
| EFT/B Immunity |
EFT: IEC 61000-4-4 |
| Surge Immunity |
Surge: IEC 61000-4-5 |
| Conducted RF Immunity |
IEC 61000-4-6 |
Certificaciones
| ATEX Letter of Conformity | 101,57 kB | Última Modificación 12.05.2022 |
| CB Safety | 340,56 kB | Última Modificación 04.09.2019 |
| Declaration of Conformity (RoHS/CE) | 139,57 kB | Última Modificación 16.11.2022 |
| ODVA EtherNet/IP Declaration of Conformity | 135,16 kB | Última Modificación 15.10.2020 |
| UL/cUL; Class1, Div 2 | 236,84 kB | Última Modificación 04.09.2019 |
| Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1,92 MB | Última Modificación 11.02.2022 |
| Declaration of REACH Compliance | 128,14 kB | Última Modificación 16.11.2022 |
| Korean KC Registration | 282,43 kB | Última Modificación 28.04.2022 |