J1939 Router/B

J1939 Router/B

A-J1939R/B

The A-J1939R/B provides intelligent data routing between either EtherNet/IP™, Modbus TCP/IP®, or Modbus® RTU to a J1939 network. This allows the user to integrate J1939 devices into a Rockwell Automation Logix platform (e.g. ControlLogix® or CompactLogix™) or any Modbus Client or Server device.

The A-J1939R/B provides auto extraction and scaling of SPNs (Suspect Parameter Number) that can be mapped to Logix UDTs Tags. The A-J1939R/B allows the user to select standard specification defined PGNs (e.g. PGN 61444-Electronic Engine Controller 1) from a list in the Slate software. The user can then export a Logix UDT from the Slate software which maps the PGN selected.

Imágenes

Click on image(s) to enlarge
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.

Características y Beneficios

  • EtherNet/IP Target or Originator with support for Class 1 connections
  • Supports Modbus TCP/IP (Ethernet) and Modbus RTU (Serial) Client/Server
  • Direct-to-Tag Technology
  • Dual Ethernet ports with support for DLR (Device Level Ring)
  • Support for NTP (Network Time Protocol) for external clock synchronization
  • Advanced Diagnostics, including packet capture
  • Support for pass-through or explicit messaging

Configuración

The Slate Configuration Utility software is used for configuration and troubleshooting of the router. The stand-alone configuration utility allows users to define the setup and configuration of the J1939 router and its connections with controllers and devices.

Especificaciones

Ethernet Ports

Specification

Rating

Connector

RJ45

Conductors

CAT5 STP/UTP

ARP Connections

Max 100

TCP Connections

Max 100

CIP Connections

Max 15

Communication Rate

10/100 Mbps

Duplex Mode

Full / Half

Auto-MDIX Support

Yes

Embedded Switch

Yes, 2x Ethernet ports

Device Level Ring (DLR)

Supported

Network Time Protocol (NTP)

Supported

 

Serial Port (RS232)

Specification

Rating

RS232 Connector

9-way terminal (shared with RS485)

RS232 Conductor

24 to 18 AWG

Electrical Isolation

1000 VDC

Baud Rate

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Parity

None, Even, Odd

Data Bits

8

Stop Bits

1

 

Serial Port (RS485)

Specification

Rating

RS485 Connector

9-way terminal (shared with RS485)

RS485 Conductor

24 to 18 AWG

Electrical Isolation

1500 Vrms for 1 minute

Baud Rate

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Parity

None, Even, Odd

Data Bits

8

Stop Bits

1

 

J1939 Network

Specification

Rating

Connector

5-way terminal, 5.08mm pitch.

Functions

Produce and Consume

Max PGN Mapping

100 (Produce and Consume)

Passthrough Messaging

Supported

Supported Baud Rates

250k and 500k

CAN Terminator

120 Ω - Software Enabled

Arbitrary Address Capable

Yes

Support for multi-packets

Yes

Configurable J1939 Name

Yes

PGN Live List

Supported

 

EtherNet/IP Target

Specification

Rating

Class 1 Cyclic connection count

4

Logix Direct-to-Tag Supported

Yes

 

EtherNet/IP Originator

Specification

Rating

Class 1 Cyclic Connections Supported

Yes

Class 3 / UCMM Connections Supported

Yes

Class 1 Connection Count

10

Class 3 / UCMM Target Device Count

10

Class 3 / UCMM Mapping Count

50

 

Modbus Client

Specification

Rating

Modes Supported

Modbus TCP/IP, Modbus RTU232, Modbus RTU485

Modbus RTU485 Termination

125 Ω - Software Enabled

Max. Modbus Server Devices

20

Max. Modbus Mapping

100

Mapping Ranges

Holding Register 0 to 65535
Input Register 0 to 65535
Input Status 0 to 65535
Coil Status 0 to 65535

Base Offset

Modbus (Base 0)

PLC (Base 1)

Configurable Modbus TCP/IP Port

Yes

Data Reformatting Supported

BB AA
BB AA DD CC
CC DD AA BB
DD CC BB AA

Modbus Server

Specification

Rating

Modes Supported

Modbus TCP/IP, Modbus RTU232, Modbus RTU485 (simultaneous)

Modbus RTU485 Termination

Software set

Mapping Ranges

Holding Register 0 to 65535
Input Register 0 to 65535
Input Status 0 to 65535
Coil Status 0 to 65535

Base Offset

Modbus (Base 0)
PLC (Base 1)

Configurable Modbus TCP/IP Port

Yes

Hardware

Specification

Rating

Power Supply

Input: 10 to 32 VDC

Power Consumption

2.2 W (Max.)
Current: 180 mA @ 10 V
Current: 85 mA @ 24 V

Dimensions (H x W x D)

101.0 x 22.5 x 120.0 mm (3.97 x 0.88 x 4.72 in)

Connector

3-way terminal

Conductors

24 to 18 AWG

Enclosure Rating

IP20, NEMA/UL Open Type

Temperature

-20 to 70 °C

Humidity

0 to 95% RH, non-condensing

Earth Connection

Yes, terminal based

Emissions

IEC 61000-6-4

ESD Immunity

EN 61000-4-2

Radiated RF Immunity

IEC 61000-4-3

EFT/B Immunity

EFT: IEC 61000-4-4

Surge Immunity

Surge: IEC 61000-4-5

Conducted RF Immunity

IEC 61000-4-6

Certificaciones

CE Declaration of Conformity (CE, UKCA, RoHS, UL) 335,85 kB Last Modified 12.05.2023
UL/cUL; Class1, Div 2 233,29 kB Last Modified 09.03.2023
ODVA Certification 127,96 kB Last Modified 12.05.2023
ATEX Letter Of Conformity 101,09 kB Last Modified 13.10.2023