802.11abg Industrial Hotspot RLX2 (FCC)
RLX2-IHW-A
The ProSoft Technology 802.11abg Industrial Hotspot (RLX2-IHW) is an industrial-grade wireless Ethernet radio for applications up to 5 mi. / 8km. The RLX2-IHW has an RF data rate up to 54 Mbps, using the IEEE 802.11b/g (2.4 GHz band) and 802.11a (5 GHz band) standards. The radio features Ultra-Fast access point switchover times of less than 10 ms, which is ideal for applications such as automated storage-retrieval systems, automotive skillet lines, and bottle filling machines.
The radio will be appreciated by both sides – OT and IT. Your OT personnel will like the radio’s EtherNet/IP embedded object and Modbus agent support, which allows them to get diagnostic data into their PLC immediately, where they can analyze and act upon data, optimizing your resources. IT departments will appreciate the radio’s SNMP support.
Características y Beneficios
- EtherNet/IP™- or Modbus®-based PLCs/PACs can use message instructions to read diagnostic information from the radios, helping to reduce down time when troubleshooting wireless network problems.
- 802.11i, WPA-2 Personal/Enterprise using 128-bit AES encryption ensures secure networking
- RADIUS security ensures secure networking with advanced authentication and encryption
- Virtual Local Area Networks (VLAN) allow for secure network segmentation
- Quality of Service (QoS) provides data prioritization for I/O control devices, video data, etc.
- Ultra-Fast Roaming (under 10ms) maintains seamless, high-speed connections to one or more devices on moving equipment and machines (such as cranes, AGVs, and carriers) as they travel between Access Points
- IGMP Snooping & Packet Filtering optimizes UDP multicast traffic for superior EtherNet/IP I/O communications
- Supports the ability to communicate with multiple Ethernet devices when used with existing third-party wireless infrastructures
- Supports Power over Ethernet (PoE) to reduce cabling costs
- Disaster recovery feature allows the radio configuration to be stored on a microSD card for quick field replacement
- Connect serial networks (Modbus, DNP 3, etc.) over 802.11 wireless networks
- SNMP support
- Simple local and remote configuration, monitoring, and wireless network diagnostics
Especificaciones
Radio
|
Frequency Band |
2.412 GHz to 2.462 GHz (FCC) |
| Wireless Standards |
802.11a, 802.11b, 802.11g, 802.11i |
|
Transmit Power (Programmable) |
2.4 GHz: Up to 100 mW (20 dBm) 5 GHz: Up to 64 mW (18 dBm) |
| Channel Data Rates (Modulation) |
802.11b:11, 5.5, 2,1 Mbps (DSSS,BPSK,QPSK,CCK) |
| Receiver Sensitivity (Typical) |
-90 dBm @ 1 Mbps |
|
Channels Selection |
1 to 13 (802.11b/g) |
| Security |
WPA2 - 802.11i with 128 bit AES-CCM |
Physical
| Enclosure |
Extruded aluminum with DIN and panel mount |
| Size |
14.8 x 11.8 x 3.8 cm (H x W x D) |
| Shock |
IEC 60068 2-27 (20g, 3-Axis) |
| Vibration |
IEC 60068 2-6 (5g, 10Hz to 150Hz) |
| Ethernet Ports |
(1) 10/100/1000 Base-T, RJ45 connector |
| Serial Port |
(1) DB9 female (serial tunneling & encapsulation) |
| Antenna Ports |
(2) RP-SMA connectors (1 trans/rec, 1 rec only) |
| Weight |
1.06 lbs (479 g) |
Environmental
| Operating Temperature |
-40°C to +75°C (-40°F to +167°F) |
| Humidity |
Up to 100% RH, with no condensation |
| External Power PoE (Power over Ethernet) |
10 to 24 VDC 802.3af Compliant |
| Peak Power Consumption |
< 6W |
Hardware
| Enclosure |
Extruded aluminum with DIN and panel mount |
| Size |
14.8 x 11.8 x 3.8 cm (H x W x D), 5.82 x 4.64 x 1.48 in (H x W x D) |
| Shock |
IEC 60068 2-6 (20g, 3-Axis) |
| Vibration |
IEC 60068 2-27 (5g, 10Hz to 150Hz) |
| Ethernet Ports |
(1) 10/100/1000 Base-T, RJ45 connector |
| Serial Port |
(1) DB9 female (serial tunneling & encapsulation) |
| Antenna Ports |
(2) RP-SMA connectors (1 trans/rec, 1 rec only) |
| Weight |
1.06 lbs (479g) |
| Environmental |
|
| Operating Temperature |
-40°C to +75°C (-40°F to +167°F) |
| Humidity |
Up to 100% RH, with no condensation |
| External PowerPoE (Power over Ethernet) |
10 VDC to 24 VDC 802.3af Compliant |
| Peak Power Consumption |
< 6W |
| Shipped with unit: |
(1) A2502S-OA (2 dBi omni-directional stub antenna) RadioLinx Bench Test Accessory Kit available (RLX-IHBTK) |
Certificaciones
| ATEX Letter of Conformity | 79,28 kB | Última Modificación 12.05.2022 |
| CB Safety | 47,05 kB | Última Modificación 14.03.2013 |
| UL/cUL; Class 1, Div 2 | 340,20 kB | Última Modificación 14.09.2020 |
| Declaration of Conformity (RoHS/CE) | 302,21 kB | Última Modificación 12.09.2017 |
| Country Approval - Argentina | 140,23 kB | Última Modificación 25.02.2015 |
| Country Approval - Australia | 30,79 kB | Última Modificación 19.05.2014 |
| Country Approval - Brazil | 853,61 kB | Última Modificación 04.12.2019 |
| Country Approval - Chile | 317,07 kB | Última Modificación 17.12.2014 |
| Country Approval - China | 382,02 kB | Última Modificación 01.03.2019 |
| Country Approval - Mexico | 529,92 kB | Última Modificación 12.09.2019 |
| Country Approval - New Zealand | 34,90 kB | Última Modificación 19.05.2014 |
| Country Approval - Peru | 583,63 kB | Última Modificación 17.12.2014 |
| Country Approval - Singapore | 48,44 kB | Última Modificación 06.02.2019 |
| Country Approval - South Africa | 350,23 kB | Última Modificación 24.02.2016 |
| Country Approval - Thailand - No Expiration | 776,65 kB | Última Modificación 27.02.2024 |
| Country Approval - United Arab Emirates | 382,72 kB | Última Modificación 02.07.2019 |
| Country Approval - Uruguay | 124,09 kB | Última Modificación 17.06.2016 |
| Declaration of REACH Compliance | 340,36 kB | Última Modificación 27.02.2024 |