Modbus Slave Network Interface Adapter for FLEX I/O
3170-MBS
The MVI94 Modbus Slave Network Interface Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Master.
Características y Beneficios
The 3170-MBS module is simple to use, requiring only the setting of several dip-switch options. The Flex and Integra module data images are pre-mapped into Modbus addresses to simplify reading and writing using standard Modbus commands. Each product is shipped with a User Manual detailing its installation and operation.
Aplicaciones
The 3170-MBS module provides highly configurable Slave capabilities to the Rockwell Automation FLEX and/or Integra platform. The product is frequently used in two general applications, SCADA Slave or as a foreign device interface master. In a SCADA Slave application the module could be used in remote controller racks as is often used in the oil and gas, or wastewater industries.
Hardware
| Specification |
Description |
| Form Factor |
Single Slot 1794 Backplane compatible |
| Backplane current load |
20 mA @ 5 VDC |
| External power supply |
12 VDC to 24 VDC 340 mA to 170 mA |
| Operating temperature |
32° F to 131° F (0° C to 55° C) |
| Storage temperature |
-40° F to 185° F (-40° C to 85° C) |
| Shock |
30 g operational |
| Vibration |
5 g from 10 to 150 Hz |
| Relative humidity |
5% to 95% (without condensation) |
| LED indicators |
Module status |
| Configuration Serial port (PRT1) |
Mini-DIN |
| Application serial Port (PRT2) |
Mini-DIN |
| Dimensions (with Module installed in Base) |
Height x Width x Depth |
Descargas
| 3170-MBS Datasheet | 187,37 kB | Última Modificación 06.03.2019 |
| 3170 MBS User Manual | 1,36 MB | Última Modificación 21.01.2020 |
| 3170-MBS Installation Guide | 94,26 kB | Última Modificación 30.04.2010 |
| LifeCycle Letter 3170-MBS | 106,11 kB | Última Modificación 20.02.2024 |