DF1 Master/Slave to HART2 Multi-drop Gateway
5127-DFCM-HART2
The ProLinx DF1 Master/Slave to HART Multi-drop Gateway creates a powerful connection between devices on a DF1 network and HART devices. This stand-alone DIN-rail mounted protocol gateway provides one serial port and up to eight HART channels.
The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable.
The HART protocol driver works as a Master on four (HART) or eight channels (HART2 – not available on certain configurations) per interface card, depending on implementation. Each channel is individually configurable.
- Características y Beneficios
- Aplicaciones
- Especificaciones
- Hardware
- Descargas
- Protocolos
- Vídeo
- Certificaciones
Características y Beneficios
Applications
The DFCM-HART gateways are the ideal solution for many applications where DF1 connectivity can be used to integrate Hart devices into a system. The DF1 gateway is a powerful module designed with both Master and Slave support, enabling easy connection to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and similar devices). In combination with the Hart device support, the module provides a very powerful interface to the many Hart devices which are in use in the industrial marketplace today. Applications for the module are found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Aplicaciones
The DFCM-HART modules are the ideal solution for the many applications where DF1 connectivity can be used to integrate HART devices into a system. The DF1 gateway is a powerful module designed with both Master and Slave support, enabling easy connection to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and similar devices). In combination with the Hart device support, the module provides a very powerful interface to the many HART devices which are in use in the industrial marketplace today. Applications for the module are found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Especificaciones
Internal Database
The ProLinx module contains an internal database that consists of areas for application data, status information, and configuration information.
The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network.
Application Data Area
The data area is used to store and retrieve data by the protocol drivers and for data exchange between protocols. The database is used as a source for write commands to remote devices and holds data collected from the remote devices. Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database.
Status Data Area
This area is used to store error codes, counters, and port status information for each port.
Configuration Data Area
This area contains module configuration information such as port configuration, network information, and command configuration. This configuration file is downloaded to, or uploaded from, this area.
Hardware
| Specification |
Description |
| Power Supply |
24 VDC nominal |
| Current Load |
500 mA max @ 32 VDC max |
| Operating Temperature |
-4° F to 122° F (-20° C to 50° C) |
| Storage Temperature |
-40° F to 185° F (-40° C to 85° C) |
| Relative Humidity |
5% to 95% (without condensation) |
| Dimensions |
Standard:
Extended: |
| LED Indicators |
Power and Module Status
(Ethernet-equiped Gateways Only) |
| Configuration Serial Port |
DB-9M RS-232 only |
| Ethernet Port (Ethernet modules only) |
RJ45 Connector Electrical Isolation 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration |
| HART Interface |
Four (4) HART Multi-drop channels Screw terminals for each channel |
|
24 VDC power supply |
Must have sufficient current capacity to supply all loop-powered HART devices Screw terminals for 24 VDC available on HART connector, supplied with the gateway, for loop-powered configurations |
| Shipped with Each Unit |
Mini-DIN to DB-9M serial cables |
Descargas
| ProSoft Configuration Builder (PCB) | ||
| DFCM HART Datasheet | 63,39 kB | Última Modificación 07.11.2014 |
| DFCM Protocol Manual | 866,04 kB | Última Modificación 16.02.2012 |
| HART Driver Manual | 922,47 kB | Última Modificación 15.09.2017 |
Protocolos
DFCM Protocol Specification
The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable.
Protocol Specifications
The DF1 Master/Slave Protocol driver provides extensive support for both Master and Slave implementations of the protocol. The serial port on the gateway is user-configurable to support the DF1 protocol (Master or Slave, Error Checking, Baud rate, etc).
| General Parameters |
|
| Communication parameters |
Local Station ID: 0 to 254 |
| Error Checking |
BCC and CRC |
| Miscellaneous |
Full hardware handshaking control, providing radio, smart modem and multi-drop support |
DF1 Master Protocol Specifications
The ports on the module can be individually configured as Master ports. When configured in master mode, the DFCM module is capable of reading and writing data to remote DF1 devices.
| DF1 Master Driver |
|
| DF1 Modes |
Full-Duplex - Master (Module generates commands) Half-Duplex - Polling |
| Command List |
Up to 100 commands per Master port, each fully-configurable for function, slave address, register to/from addressing and word/bit count |
| Polling of Command List |
User-configurable polling of commands, including disabled, continuous, and on change of data (write only) |
DF1 Slave Protocol Specifications
The ports on the module can be individually configured to support the Slave mode of the DF1 protocol. When in slave mode, the module can accept DF1 commands from a master to read/write data stored in the module's internal registers.
| DF1 Slave Driver |
|
| DF1 Modes |
Full Duplex - Slave (not peer mode) |
| Configurable parameters per slave port |
Data Table File Start (File N[x] 0 to 999) |
HART Protocol Specification
The HART protocol driver works as a Master on four (HART) or eight channels (HART2 not available on certain configurations) per interface card, depending on implementation. Each channel is individually configurable.
Protocol Specifications
The HART Master Protocol exists in 4 channel implementations with HART2 allowing 8 channels. This driver can be configured on an individual channel basis to operate as a HART Master Station and supports all the available HART commands including Universal, Common Practice and Device Specific Commands. Each HART channel is independently configured to interface with the internal database in the module.
The auto-poll mode allows the module to automatically collect data from each HART instrument on the channel and store the data in the module's database without the use of user commands. The module automatically generates HART commands 0, 3, 13, 14 and 15.
| General Parameters |
|
| Communication parameters |
Number of HART Preambles: 2 to 50 Enable Handheld: Y or N Primary Master: Y or N |
| Configurable Parameters per Channel |
Auto-Poll Enable, Short / Long Address Retries, Retries After Error Poll Time After Error, Number of Commands, Slave List Error Pointer |
| HART Driver |
|
| Command List |
Up to 100 fully configurable commands per channel |
| Polling of command list |
User configurable polling of commands, including disabled, continuous, on change of data (write only) and dynamically user or automatic enabled. |
HART® is a registered trademark of the HART Communication Foundation
Certificaciones
| CB Safety | 35,78 kB | Última Modificación 27.04.2022 |
| UL/cUL; Class 1, Div 2 | 1,08 MB | Última Modificación 31.03.2020 |
| UL Certificate of Compliance - Canada | 1,10 MB | Última Modificación 16.11.2022 |