- Solutions
- Productos
- SERVICIOS Y SOPORTE
-
NOVEDADES Y EVENTOS
- ProSoft Insights (Blog)
-
Podcast
Modbus Serial Module for CompactLogix L1 and Point I/O Adapters ILX34-MBS232
ILX34-MBS232
ProSoft Technology’s ILX34-MBS232 module is ideal for point to point applications with a maximum distance of 50 feet away (15.2 meters) your processor. These include SCADA and field device interface applications. The module can be used in CompactLogix L1 processors or Distributed 1734 Point I/O systems. In addition, the module can be configured as a Master or Slave.
Imágenes
Click on image(s) to enlarge
Características y Beneficios
- Add-on Instruction creates UDTs, providing logical definitions for I/O, status, and control data
- Diagnostic data available in RSLogix 5000/Studio 5000 controller tags, allowing decisions to be made based upon node health
- Module configuration is backed up in the CompactLogix project (ACD file)
- The serial port can be enabled or disabled through ladder logic
- Supports up to 1,000 words of data
- Supports up to 30 Modbus Commands & up to 36 words per command
- The serial port can be configured as a Modbus Master or Modbus Slave device
- Suitable for SCADA and field device interface applications
Especificaciones
General Specifications - Modbus Master/Slave
Configuration Environment
RSLogix 5000/Studio 5000
Communication parameters
Baud Rate: 2400, 4800, 9600, 19200, 38400
Stop Bits: 1 or 2
Data Size: 7 or 8 bits
Parity: None, Even, OddModbus Modes
RTU mode (8-bit data size only)
ASCII mode with LRC error checking
Node Address
1 to 247
Modbus Function Codes Supported
1: Read Coil Status
2: Read Input Status
3: Read Holding Registers
4: Read Input Registers
5: Force (Write) Single Coil
6: Preset (Write) Single Holding Register
8: Diagnostics (Slave Only, Responds to Sub function 00)15: Force( Write) Multiple Coils
16: Preset (Write) Multiple Holding RegistersHardware
Hardware Specifications
Specification
Description
Power Supply
10 to 28.8 VDC (Two 24V power supplies needed if using a Series A L16/L18 controller)
Pointbus Current
75mA @ 5 VDC
Serial Line Voltages
RS-232: -15 to +15 VDC
RS-422/485: -7 to +12 VDC
Number of Inputs
1 Full duplex
Module Location
1734-TB or -TBS wiring base assembly (not included)
1734-TOP or -TOPS
LED Indicators
1 green/red module status indicator
1 green/red network status indicator
2 green TXD, RXD status indicators
Operating Temperature
32°F to +131°F (0°C to +55°C)
Storage Temperature
32°F to +131°F (0°C to +55°C)
Relative Humidity
5% to 95% RH with no condensation
Dimensions (H x W x D)
2.21 x 0.47 x 2.97 in
56 x 12 x 75.5 mm
Shock
30g peak acceleration (Operational)
50g peak acceleration (Non-operational)
Vibration
Tested 5g @ 10 to 500 Hz
ESD immunity
6kV contact discharges
8kV air discharges
Certificaciones
CB Safety 328,27 kB Última Modificación 07.08.2014 Declaration of Conformity (RoHS/CE) 351,95 kB Última Modificación 18.12.2020 ATEX Letter of Conformity 106,12 kB Última Modificación 12.05.2022 UL/cUL; Class 1, Div. 2 234,92 kB Última Modificación 08.04.2019 Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) 1,92 MB Última Modificación 11.02.2022 Declaration of REACH Compliance 339,85 kB Última Modificación 08.02.2021
