Control Net Router

ControlNet Router

A-CNR

The A-CNR ControlNet Router provides an efficient method of bridging between ControlNet and Ethernet networks. The module provides intelligent routing between EtherNet/IP or Modbus TCP/IP and a ControlNet network. The module can be configured as a ControlNet Target or an Originator. As a ControlNet target, a Logix controller can own the ControlNet router using a scheduled connection. As a ControlNet originator, the module can be configured to own ControlNet I/O or exchange data with up to 10 ControlNet devices.

The module can also be configured as a PCCC Client (allows the module to emulate a PLC5 or SLC5 providing legacy interface to PanelViews), EtherNet/IP target or originator, and as Modbus TCP/IP client or server.

As an EtherNet/IP target, a Logix controller can own the router using a Class 1 connection. As an EtherNet/IP originator, the router supports class 1 connection or explicit messaging.

As a Modbus TCP/IP client, the router can map ControlNet data to Modbus registers for exchange with Modbus TCP/IP servers. As a Modbus TCP/IP server, the router can exchange the ControlNet data with Modbus TCP/IP clients.

The I/O data can be accessed via Ethernet using either the PCCC or EtherNet/IP™ or Modbus TCP/IP protocols. The support for PCCC protocol allows the module to emulate user-defined PLC5-type data files data simplifying the migration to Ethernet-only PanelViews. The module also provides a range of statistics on Ethernet and ControlNet to assist with fault finding.

A built-in webserver provides detailed diagnostics of system configuration and operation, including the display of ControlNet operation and communication statistics, without the need for any additional software.

Imágenes

Click on image(s) to enlarge
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.

Características y Beneficios

  • Own ControlNet I/O enabling the migration from legacy Logix systems/controllers to newer EtherNet/IP Logix platforms, without replacing the existing ControlNet I/O.
  • Can be configured as a ControlNet Target or Originator.
  • Can operate as ControlNet Keeper.
  • Supports Promiscuous Capture mode allowing the ControlNet Router to capture all traffic on the ControlNet network.
  • Can be configured as an EtherNet/IP Target or Originator.
  • Can be configured as a Modbus TCP/IP Client to exchange ControlNet data with Modbus TCP/IP servers.
  • Can be configured as Modbus TCP/IP Server to exchange ControlNet data with Modbus TCP/IP clients.
  • Connect Ethernet-only PanelViews to Logix via ControlNet.
  • Supports Scheduled & Unscheduled ControlNet for PanelViews.
  • Program Logix controllers via ControlNet.
  • Supports Redundant ControlNet and Ethernet.
  • Advanced Diagnostics, including packet capture and webserver.

Configuración

The Slate Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the ControlNet router, connections with controllers and devices.
The configuration utility can be downloaded from the "Downloads" section.

Especificaciones

EtherNet/IP Network

Specification

Description

Connector

RJ45

Conductors

CAT5 STP/UTP

ARP Connections

100 max.

TCP Connections

100 max.

CIP Connections

50 max.

Communication Rate

10/100 Mbps

Duplex Mode

Full / Half

Auto-MDIX Support

Yes

Embedded Switch

Yes, 2 x Ethernet ports

Device Level Ring (DLR)

Yes

Network Time Protocol

Yes

ControlNet Network

Specification

Description

Connectors

2 x BNC (ControlNet A, B)

Conductors

Quad shield RG-6 coaxial cable

Routing (via RSLinx programming)

Yes

Redundancy

Yes

 

ControlNet Target

Specification

Description

Scheduled Connection Size

Max. Input size – 408 bytes (400 bytes of mapped data)

Max. Output size – 404 bytes (400 bytes of mapped data)

Unscheduled Routed Clients

40 max.

Scheduled Connection Count

1

 

ControlNet Originator

Specification

Description

Scheduled Connection Count

10 max.

Scheduled Connection Data

Input Connection Data: Max. 500 bytes per connection.
Output Connection Data:
Max. 277 bytes for 1 connection.
Max. 269 bytes for 2 connections.
Max. 261 bytes for 3 connections.
Max. 253 bytes for 4 connections.
Max. 245 bytes for 5 connections.
Max. 237 bytes for 6 connections.
Max. 229 bytes for 7 connections.
Max. 221 bytes for 8 connections.
Max. 213 bytes for 9 connections.

Explicit Unscheduled Connections

10 max.

Multiple ControlNet Connection Originators

Supported

 

PCCC

Specification

Description

PCCC Connections

10 max.

PCCC Payload

1000 bytes max.

 

EtherNet/IP Target

Specification

Description

Class 1 Connection Size

Max. Input size – 500 bytes (492 bytes of mapped data)

Max. Output size – 496 bytes (492 bytes of mapped data)

Class 1 Connection Count

1

Class 3 Messaging Support

Yes

UCMM Messaging Supported

Yes

 

EtherNet/IP Originator

Specification

Description

Class 1 Cyclic Connection Supported

Yes

Class 3 UCMM Connections Supported

Yes

Class 1 Connection Count

10

Class 3 UCMM Connection Count

10

Class 3 UCMM Mapping Count

50

Direct-To-Tag Logix Support

Yes

 

Modbus TCP/IP Client

Specification

Description

Server Devices

20 max.

Modbus Mappings

100 max. per server device

Mapping Ranges

0 to 65535

Base Offset

Modbus (base 0); PLC (base 1)

Configurable Modbus TCP/IP Port

Yes

Data Re-formatting Supported

BB AA
BB AA DD CC
CC DD AA BB
DD CC BB AA

 

Modbus TCP/IP Server

Specification

Description

Mapping Ranges

0 to 65535

Base Offset

Modbus (base 0), PLC (base 1)

Configurable Modbus TCP/IP Port

Yes

Hardware

Specification

Rating

 

Power Supply

Input: 10 to 36 VDC, (85 mA @ 24 VDC)

Power Consumption

2.0 W (max)

 

Dimensions (H x W x D)

149.0 x 34.0 x 116.0 mm

 

Connector

3-way terminal

 

Conductors

24 to 18 AWG

 

Enclosure Rating

IP20, NEMA/UL Open Type

 

Temperature

-20 to 70 °C

 

Earth Connection

Yes, terminal based

 

Emissions

IEC 61000-6-4

 

ESD Immunity

EN 61000-4-2

 

Radiated RF Immunity

IEC 61000-4-3

 

EFT/B Immunity

IEC 61000-4-4

 

Surge Immunity

IEC 61000-4-5

 

Conducted RF Immunity

IEC 61000-4-6

 

Certificaciones

ODVA Certification 598,63 kB Última Modificación 28.09.2020
UL/cUL; Class1, Div 2 238,99 kB Última Modificación 25.01.2024
ATEX Letter Of Conformity 100,69 kB Última Modificación 26.10.2023
CE Declaration of Conformity (CE, UKCA, RoHS, UL) 339,65 kB Última Modificación 26.01.2024