Revised July 2024

SUPPORT, SERVICE AND RETURN MATERIAL AUTHORIZATION INSTRUCTIONS

ProSoft Technology, Inc. (ProSoft) is committed to providing the most efficient and effective support possible.

Before calling, please gather the following information to assist in expediting this process:

 1.    Product Version Number
 2.    System architecture
 3.    Network details

If the issue is hardware related, we will also need information regarding:
 4.    Module configuration and associated ladder files, if any.
 5.    Module Operation

  • Configuration/Debug status information
  • LED patterns

 6.    Details about the Serial, Ethernet or Fieldbus devices interfaced with, if any.

In order to return a Product for repair, exchange or otherwise, the Customer must obtain a Return Material Authorization (RMA) number from ProSoft and comply with ProSoft shipping instructions.

A. How to Contact Us:

For Credit RMA Inquiries:  E-mail address: ps.rma@belden.com

For Technical Support RMA Inquiries:

Web site: www.prosoft-technology.com/support
E-mail address: ps.support@belden.com

RMA

Asia Pacific
 Phone: +60-3-2247-1898
 Email: ps.support.ap@belden.com
 Languages spoken include: Chinese, English

Latin America (Spanish speaking countries)
 Phone: +52-222-264-1814
 Email: ps.support.la@belden.com
 Languages spoken include: Spanish, English

Europe / Middle-East / Africa
 Phone: +33-5-34-36-87-20
 Email: ps.support.emea@belden.com
 Languages spoken include: French, English

Latin America (Brazil)
 Phone: + 55-11-5084-5178
 Email: ps.support.la@belden.com
 Languages spoken include: Portuguese, English

North America (location in California)
 Phone: +1 661-716-5100
 Email: ps.support@belden.com
 Languages spoken include: English, Spanish

Return Address Information
 10855 Bailey Road
 Suite 300
 Cornelius, NC  28031, USA

 

B.  Return Material Authorization (RMA) Policies and Conditions

The following RMA Policies and Conditions (collectively, “RMA Policies”) apply to any returned Product. Except as otherwise expressly indicated in this document or as separately agreed to in writing, this transaction is subject exclusively to ProSoft's General Terms & Conditions of Sale. In the event of any inconsistency between the RMA Policy and the Warranty, the Warranty shall govern. For details on Product Warranty, please see ProSoft’s Terms and Conditions of Sale on our website at www.prosoft-technology.com. Sales and services outside of the U.S. may be subject to separate or supplemental terms and conditions of sale. For further information, please consult your nearest ProSoft Technology sales office.

1) All Product Returns:   

  • a) In the event that the Customer experiences a problem with the Product for any reason, Customer must contact ProSoft Technical Support at one of the telephone numbers listed above in Section A to obtain approval for issuance of a Return Material Authorization (RMA) number. A Technical Support Engineer will request that you perform several tests in an attempt to isolate the problem. If after completing these tests, the Product is found to be the source of the problem, ProSoft will issue an RMA number. If the product is not shipped within 60 days of the issue of the RMA number, the RMA will be closed.
  • b) All returned Products must be shipped freight prepaid, in the original shipping container or equivalent, to the location specified by ProSoft. The RMA number is to be prominently marked on the outside of the shipping box and on the shipping documents.  Customer agrees to comply with ProSoft shipping instructions and insure the Product or assume the risk of loss or damage in transit. Products shipped to ProSoft using a shipment method other than that specified by ProSoft, or shipped without an RMA number will be returned to the Customer, freight collect. Costs in connection with or as a result of defective or nonconforming Products, including, cost to transport the Products from Buyer to ProSoft and return shipment to Buyer, will be borne by ProSoft.  
  • c) Credit and exchanges for most products will be allowed within 6 months from the date of shipment. A 20% restocking fee applies to all approved credit returns whereby a Customer has an application change, ordered too many, does not need or has overstocked. Products returned for credit as a result of this subparagraph require that all products are unopened and the original factory seal is intact. Wireless accessories cannot be returned for credit.
  • d) If customized products are returned, supplementary terms and conditions will apply and take precedence over this document.
  • e) PLEASE NOTE:  It is imperative for the Customer to save the unit configuration data, containerized application data and any stored process data prior to shipping the unit to ProSoft. When a unit is returned for analysis/or repair firmware may be updated to the latest version and the unit may be set to factory default configuration. ProSoft is not liable for the loss of any data.

2) Procedures for Return of Units Under Warranty:

  • a) An Evaluation Report will accompany all repaired/returned units detailing what was repaired or replaced. In-Warranty returns will be repaired and returned to the customer within 6 weeks (dock date to ship date).  This timeline is defined as “from receipt of product at ProSoft’s designated repair location to reshipment date.”
    • i) The unit being returned should be returned in the original packaging or equivalent. If after evaluating the product it is deemed to be unrepairable due to manufacturing defect, a replacement unit, either remanufactured or new, will be sent.
    • ii) If a unit under warranty fails within the first 90 days of shipment, a new PO is required and a new replacement unit will be provided.  Credit will be issued after the defective unit is received by ProSoft and it is determined that the failure is not due to user fault. If failure is a result of user fault, customer will be contacted, and no credit will be issued.  Warranty resets to 3 years.
    • iii) A purchase order is not required to return the defective unit. ProSoft will perform a pre-repair evaluation, the results will determine:
      • (1) MANUFACTURING DEFECT: Unit repaired or replaced and returned to ship to address provided via email.
      • (2) USER FAULT: Warranty is voided.  Customer has two options:
        • (a) Repair the unit at the customer’s expense. A purchase order or credit card is required for repair fees. Repair fees will be the higher of 30% of the current list price or $500.00 (USD).
        • (b) Return the unit unrepaired, customer is responsible for shipping costs. No credit will be issued.
    • iv) ProSoft will attempt to repair or replace Products that have transitioned to End of Production and will be based on availability of components needed to repair the unit(s) or availability of replacement products.
  • b) Emergency Replacement(s) will be available for “plant down” situations.
    • i) A new Distributor PO will be required for an emergency replacement at the original sale price.
    • ii) The replacement unit will be either a remanufactured or a new unit.  The warranty period on replaced item(s) will be the remaining warranty period of the original unit or 90 days, whichever is longer.
    • iii) Credit will be issued after the defective unit is received by ProSoft and it is determined that the failure is not due to user fault. If failure is a result of user fault, customer will be contacted, and no credit will be issued. 
  • c) Plant Down Prevention Management – ProSoft highly recommends customer purchase a spare unit to prevent future production interruptions. Options available:
    • i) Purchase a remanufactured unit – warranty period is 6 months
    • ii) Purchase a new unit – warranty period is 3 years.

3) Procedures for Return of Units Out of Warranty:

  • a) Customer sends unit in for evaluation to location specified by ProSoft, freight prepaid and insured or assume risk of loss. If repair is required, Distributor must issue PO to ProSoft.
  • b) An Evaluation Report will accompany all repaired/returned units detailing what was repaired or replaced.
  • c) If no fault is found or the returned unit cannot be repaired, the customer will be notified. If customer requests the unit be returned, an account number for specified freight company for processing return shipment is required; if discard of equipment is chosen, ProSoft will scrap the unit.
  • d) If customer chooses to repair the defective unit, a purchase order will be required.  The charge to Customer will be the higher of 30% of current list price (USD) or $500.00, plus freight charges, duties and taxes as applicable
  • e) ProSoft will attempt to repair Products that have transitioned to End of Production and will be based on availability of components needed to repair the unit(s).