PROFIBUS DPV1 Master for CompactLogix
ILX69-PBM
The ILX69-PBM PROFIBUS DPV1 Master module provides all the advantages of in-chassis PROFIBUS communication, such as the inclusion of an AOI and the Autoscan features which greatly reduce your commissioning time, and ComDTM that provides remote Ethernet connectivity with asset management software.
With these modules, CompactLogix™ processors can easily communicate with slave devices supporting PROFIBUS DPV0 and DPV1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.
Check out a successful application with this module: Help CIP System Communicate.
Imágenes
|
Características y Beneficios
- AOI: Module communication is integrated within Studio/RSLogix 5000 using a sample Add-On Instruction (AOI), or sample ladder logic file, reducing commissioning time.
- Autoscan: The new Autoscan feature reduces start up times and simplifies troubleshooting by scanning the PROFIBUS network and uploading slave device addresses and configuration information. (Reads and maps nodes automatically to the module.)
- ComDTM: Allows remote Ethernet connectivity with Asset Management Software significantly lowering maintenance costs. You can configure, commission, maintain and diagnose your fieldbus devices throughout their entire lifecycle with this comprehensive, fully integrated engineering and maintenance environment.
- SD card slot (SD card optional) is used for storing configuration files in the event of a disaster. It can also be used to update the firmware of the module without the need of a 1769 CPU.
Especificaciones
PROFIBUS DP Specifications
| Specification |
Description |
| Slaves |
Maximum 125 |
| Input/Output |
Maximum 244 Bytes per Slave |
| Input Data |
Maximum 5712 Bytes |
| Acyclic Data |
DPV1 |
| Status data |
88 Bytes |
| Output data |
Maximum 5760 Bytes |
| DPV1 services |
Class 1 Read/Write |
| Services |
Global-Control, Slave-Diagnostic, Set-Parameter |
| Sync, Freeze Command |
Supported |
| Baud rate |
9.6 kBaud, Auto-detection mode is supported |
Hardware Specification
| Specification |
Description |
| PROFIBUS Interface |
RS-485, max. 12 Mbps, potential free, according |
| Diagnostic Interface |
10/100 Ethernet, RJ45 |
| Power Supply |
+5 V ±5 % / 570 mA |
| Max. Distance Rating |
2 slots |
| Dimensions |
Standard 1769 Single-slot module |
| Burst |
EN 61000-4-4, 2 kV, 5 kHz |
| Surge |
EN 61000-4-5, 2 kV common mode, 1 kV differential mode |
| ESD |
EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect |
| Radiated/Conducted Immunity |
EN 61000-4-3, 10 V/m, 30 ...1000 MHz, 80% AM, 1 kHz sine wave EN 61000-4-6, 10 V, 0,15 ...30 MHz |
| Radiated/Conducted Emission |
EN 55011 Class A |
| Vibration/Shock |
IEC 600068-2-6, 10-150 Hz, ± 0,75 mm, ± 1 g, 1 Octave/min IEC 600068-2-27, 15 g, 11 ms |
| Operating Temperature |
0°C to 60°C (32°F to 140°F) |
| Relative Humidity |
5 to 95% (non-condensing) |
| PROFIBUS conformance |
Certified |
Certificaciones
| ATEX Letter of Conformity | 55,24 kB | Última Modificación 12.05.2022 |
| CB Safety | 388,14 kB | Última Modificación 26.02.2020 |
| Declaration of Conformity (RoHS/CE) | 442,33 kB | Última Modificación 18.12.2020 |
| UL/CUL; Class1, Div. 2 | 388,14 kB | Última Modificación 14.02.2019 |
| PI PROFIBUS Certification | 158,38 kB | Última Modificación 15.09.2017 |
| Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1,92 MB | Última Modificación 11.02.2022 |
| Korean KC Registration | 261,73 kB | Última Modificación 25.03.2020 |
| Declaration of REACH Compliance | 341,08 kB | Última Modificación 08.02.2021 |