Printer friendly version of this page. Find a Distributor near you.
QuickServer Serial Ethernet

EtherNet/IP to BACnet MS/TP or BACnet/IP QuickServer Gateways

PS-QS-1x10-0780

FieldServer’s EtherNet/IP™ to BACnet/IP® or BACnet MS/TP QuickServer communication gateways allows high-speed bi-directional data transfers between EtherNet/IP™ enabled controllers or devices and BACnet/IP® or BACnet MS/TP controllers or devices.
 
 These gateways come in other wise functionally identical 250 data point (PS-QS-1010-0780) and 500 data point (PS-QS-1510-0780) variations and require no additional software purchase for configuration or diagnostics. The introduction of the free FieldServer Toolbox software and built in web GUI has dramatically simplified gateway discovery, configuration uploading and downloading, and accessing communication diagnostics. Further, the addition of both improved, more detailed, sample configuration files, as well as our step by step tutorial video, has made first time commissioning easier than it’s ever been!

Características y Beneficios

  • Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • DIN rail mount included with gateway
  • DIP switches to select baud rate or node ID on the fly
  • BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX)

Especificaciones

Field Connections

  • Ethernet 10/100 RJ45
  • Two Serial RS-485 terminal (up to 115K baud)

Environment

  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

  • 9 to 30 Vdc or Vac or 5 Vdc
  • Current draw 150mA @ 12VOther
  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

Physical Dimensions (WxDxH)

  • 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)Approvals
  • TUV approved to UL 916 standard
  • CE Mark
  • BTL Mark (PS-QS-1010)
  • RoHS Compliant
  • FCC Part 15 Compliant

Hardware

Field Connections

  • Ethernet 10/100 RJ45
  • Serial RS-485 terminal (up to 115K baud)
  • FTT-10 LonWorks port

Environment

  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

  • 9 to 30 Vdc or Vac or 5 Vdc
  • Current draw 279mA @ 12Vdc

Other

  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

Physical Dimensions (WxDxH)

  • 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)

Approvals

  • TUV approved to UL 916 standard
  • CE Mark
  • BTL Mark (PS-QS-1010)
  • RoHS Compliant
  • FCC Part 15 Compliant

Descargas

PS-QS-1x10-0780 Datasheet 436,67 kB Última Modificación 18.03.2015
Sample Configurations 40,96 kB Última Modificación 22.12.2017
Product Datasheet & Manual Collection 6,01 MB Última Modificación 22.12.2017
QuickServer Setup Guide 1,67 MB Última Modificación 08.07.2013
FieldServer Toolbox Setup 10,55 MB Última Modificación 22.12.2017
SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) 17,04 MB Última Modificación 12.09.2015

Certificaciones

Declaration of Conformity (RoHS\CE) 255,62 kB Última Modificación 24.07.2018