Gateways  >  Modbus RTU to LonWorks QuickServer Gateways
Find a Distributor Request Pricing
QuickServer, LonWorks, Ethernet, BACNET,

Modbus RTU to LonWorks QuickServer Gateways

PS-QS-1x11-0154

Descontinuado: Producto no disponible en stock. More Info
Recommended replacements: PS-QS-1x11-F

QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.

System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.

The user can preselect two Building Automation System (BAS) drivers (serial, Ethernet and/or LonWorks) to be loaded on the QuickServer at no extra charge. Additional drivers are available at extra cost. Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP®, BACnet MS/TP, LonWorks® and JCI Metasys® N2. QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer. 

Características y Beneficios

  • Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • DIN rail mount included with gateway
  • DIP switches to select baud rate or node ID on the fly
  • BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)

Especificaciones

Field Connections

  • Ethernet 10/100 RJ45
  • Two Serial RS-485 terminal (up to 115K baud)

Other

  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

Hardware

Field Connections

  • Ethernet 10/100 RJ45
  • Serial RS-485 terminal (up to 115K baud)
  • FTT-10 LonWorks port

Environment

  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

  • 9 to 30 Vdc or Vac or 5 Vdc
  • Current draw 279mA @ 12Vdc

Other

  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

Physical Dimensions (WxDxH)

  • 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)

Approvals

  • TUV approved to UL 916 standard
  • CE Mark
  • BTL Mark (PS-QS-1010)
  • RoHS Compliant
  • FCC Part 15 Compliant

Descargas

PS-QS-1x11-0154 Datasheet 382,64 kB Última Modificación 09.12.2022
QuickServer Setup Guide 2,84 MB Última Modificación 27.07.2020
FieldServer Toolbox Setup 12,05 MB Última Modificación 27.07.2020
SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) 17,04 MB Última Modificación 11.09.2015
Protocol Driver and Configuration Manual PS-QS-1x11-F 4,70 MB Última Modificación 09.08.2023
LifeCycle Letter FieldServer Lonworks Gateways 140,46 kB Última Modificación 10.08.2023

Certificaciones

Declaration of Conformity (RoHS\CE) 426,18 kB Última Modificación 17.12.2020
Declaration of REACH Compliance 593,33 kB Última Modificación 17.12.2020
UKCA Certification 327,80 kB Última Modificación 12.05.2022