Wireless I/O Radio Kit with Onboard I/O
BR-xxxx-RM4
The WIO® Radio Module Kit with Onboard I/O is the quickest and simplest method for replicating process signals without the hassle of digging trenches, running conduit, and wiring. Both Radio Modules A and B are equipped with two configurable digital channels so that you can run digital signals in both directions and in any combination. Radio A is equipped with two analog 4-20 mA inputs that correspond to the two analog 4-20mA outputs on Radio B.
Note: This product is available for use in North America only.
Características y Beneficios
SIMPLE RADIO AND I/O COMBO-IN-ONE
The WIO® Radio Module Kit with Onboard I/O is the quickest and simplest method for replicating process signals without the hassle of digging trenches, running conduit, and wiring. Both Radio Modules A and B are equipped with two configurable digital channels so that you can run digital signals in both directions and in any combination. Radio A is equipped with two analog 4-20 mA inputs that correspond to the two analog 4-20mA outputs on Radio B.
READY OUT-OF-THE-BOX
The secure point-to-point wireless I/O system is factory paired and requires zero software programming. The system is configured using only the DIP switches on each module. These modules mount on any 35 mm DIN rail with no additional mounting hardware required - just need wire and a screwdriver.
FAIL-SAFE PROTECTION
Fail-safe output options let you determine what values the outputs will go to in the event of RF signal loss. Digital signals can fail to ‘on’ or ‘off’ states. For analog signals, you can select last known value, 4 mA or 20 mA. All fail-safe modes are configured using DIP switches.
SECURE, ROBUST AND RELIABLE WIRELESS
Although using this radio system is simple, the RF technology behind it is highly advanced, robust, reliable, and secure using AES encryption providing you with a peace-of-mind. You also have to ability to set the communication speed between radios to 250 ms or 1 second to control power consumption and signal response requirements. The WIO Radio I/O System is available in 900 MHz and 2.4 GHz. The 900 MHz option offers selectable 140 mW or 1 W transmit power. Both options offer multiple user-selectable RF channels so that multiple systems can operate within close proximity.
Especificaciones
I/O & Hardware
| Specification | Description |
| Analog 4-20 mA Communication | 2 x Uni-Directional (Radio A to B) |
| Digital/Discrete Communication | 2 x Bi-Directional (DIP Switches) |
| DIO Mismatch Indication - Right LED |
Green: OK |
| DIN Rail Mounting Compatibility | 35 mm Standard DIN Rail (Direct Mount) |
| Built-In Mounting Hardware | Spring-Loaded Clip-On System |
| Wire Gauge | Solid / Stranded (AWG) 28-12 Gauge |
| Wire Rating (Recommended) | 300 V RMS, 80 °C and 300 V, 105 °C |
| Supply Voltage Range | 9 to 30 Vdc (±5 %) |
| Reverse Polarity Protection | Yes |
| Power Consumption | TBD |
| Packaging Dimensions (WxHxD) |
4.8 x 5.1 x 2.8 in |
| Net Dimensions |
0.7 x 3.9 x 4.5 in |
| Packaging Weight | 0.8 lbs / 363 g |
| Net Weight (Single Radio) | 0.3 lbs / 136 g |
| Warranty | 2-Year Limited |
Radio
| Specification | Description |
| Communication Type | Point-to-Point Wireless I/O Communication System |
| Radio Frequency (RF) |
902 to 928 MHz |
| RF Security | 128-bit AES Encryption |
| Antenna Connector Type | SMA (Female Connector) |
| Default Transmit Speed / Response Time | 1 Second |
| Turbo Transmit Speed / Response Time | 250 ms |
| Line of Sight Maximum RF Range |
900 MHz: Up to 40 Miles (64.4 Km) |
| RF Transmit Power |
900 MHz: 140 mW/1 W (22 or 30 dBm - user selectable) |
| Receiver Sensitivity |
900 MHz: -101 dBm |
| Spread Spectrum |
900 MHz: FHSS |
| RF Link Indication - Left LED |
Green: OK |
| RF Timeout Trigger | 10 Seconds |
| RF Response Time |
Flashing Normal (1 sec) |
| RF Signal Quality |
Flashing Green: Strong |
Analog Inputs (Radio A only)
| Specification | Description |
| 2x Analog Inputs | 4 to 20 mA (16-bit Resolution) |
| Accuracy | < 0.2 % of Full Scale |
| Internal Loop Power | 9 to 30 Vdc (Depends on Supply Voltage) |
| AI Input Impedance (loop) | 250 Ohm |
Analog Outputs (Radio B only)
| Specification | Description |
| 2x Analog Outputs | 4 to 20 mA (16-bit Resolution) |
| Output Terminal Voltage Range |
10 Vdc Min. |
| RF Fail-Safe Output Modes | Last Known Value (Def.), < 4 mA, > 20 mA (DIP) |
Digital I/O (Radios A and B)
| Specification | Description |
| I/O Channel Count | 2x Configurable Channels on Each Radio Module |
| Signal Direction |
Any Direction, Any Combination (If A = In; B = Out) |
| Input Voltage Range | 3 to 30 VDC |
| Input Voltage Threshold |
Signal ("H"): TBD |
| Output Rating |
1 A Sink Current for |
| Fail-Safe Output Modes | On or Off (DIP Switch Controlled) |
Certificaciones
| CSA (US and Canada) | 85,35 kB | Última Modificación 16.09.2019 |