We can't wait to see you at Booth #1018 at Automation Fair® 2019 Click here to register.
PLX51-PBM

PLX51-PBM PROFIBUS DP Master/Slave to EtherNet/IP™ Gateway

PLX51-PBM

The PLX51-PBM gateway provides connectivity to EtherNet/IP™ networks for PROFIBUS DP networks by operating as either a Master or Slave device on the PROFIBUS DP network.

For easy integration to a Rockwell Automation Controller, the gateway and configuration software create dynamic AOI’s based on the user configuration to add logical tag names to the PLC project file. Thus, reducing the overall programming time.

With advanced tools such as PROFIBUS device discovery and a built-in PROFIBUS DP packet capture utility, PROFIBUS DP network commissioning time can be greatly reduced. 

Dual Ethernet ports of the module can support either DLR (Device Level Ring) topology, or can be used as an embedded switch for flexible installation options.

Imágenes

Click on image(s) to enlarge
Drag with the mouse. Click for close.

Características y Beneficios

  • Supports DLR for EtherNet/IP networks
  • PROFIBUS master or slave (with multi-slave support)
  • PROFIBUS packet capture tool built in

Configuración

The PLX50 Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the PROFIBUS DP network, connections with Rockwell Automation controllers and devices over EtherNet/IP, and build custom Add-On Instructions (AOIs) to be imported into Studio 5000 applications. 

With the ability to import custom AOI’s into the Studio 5000 environment and advanced PROFIBUS DP tools such as the packet capture utility, commissioning time of a network can be greatly reduced.  

Especificaciones

EtherNet/IP™ Server

As an EtherNet/IP server, the gateway can support up to 4 Class 1 I/O connections back to a Controller on an EtherNet/IP network. Additionally, the server can respond to Class 3 messages from an EtherNet/IP client for the transfer of Status and PROFIBUS DP data.

 

PROFIBUS DP Master V1

Cyclic or acyclic data can be transferred with Class 1 or Class 2 DPV1 services, allowing communication with slave devices supporting PROFIBUS DPV0 or V1 protocols. The gateway acts as an input/output link between the PROFIBUS network and the EtherNet/IP protocol. Data transfer by the EtherNet/IP protocol is asynchronous from data transfer on the PROFIBUS network.

  • Easy-to-use drag and drop configuration interface via ProSoft PLX50 Configuration Utility
  • GSD file import library
  • Monitoring and Modification of process data and DPV1 acyclic data
  • Multi-drop on a PROFIBUS DPV1 network with other compatible devices
  • Automatic project documentation, and Bus Parameter calculation
  • Supports online slave diagnostics, and extended diagnostic data (DPV1)
  • Auto baud detection at all valid PROFIBUS DPV1 rates up to 12 Mbps
  • Master Status LED Indicators for Operations, Network Communication, Master Token-Hold and Network Configuration.
  • Up to 125 Slaves can be connected with a repeater
  • Up to 1536 cyclic bytes input and 1536 bytes output data
  • Supports Extended Diagnostic Data
  • Alarm Handling (DPV1)
  • Supports Sync and Freeze commands
  • Supports PROFIdrive 3.1 compliant parameter read and write operations
  • Supports Multicast and Broadcast telegrams (DPV1)

 

EtherNet/IP

 

Connector

RJ45

Conductors

CAT5 STP/UTP

ARP Connections

Max 40

TCP Connections

Max 40

CIP Connections

Max 10

Communication Rate

10/100Mbps

Duplex Mode

Full / Half / Auto Negotiate

Auto MDIX

Yes

PROFIBUS DP

 

Protocol

PROFIBUS DP Master or Slave

Baud Rate

9600, 19.200, 45.5 kbps, 93.75 kbps, 187.5 kbps, 500 kbps, 1.5 Mbps, 3 Mbps, 6 Mbps, 12 Mbps

Support

DPV0 or DPV1

Cyclic I/O data

Input: 1536 bytes
Output: 1536 bytes

Stop bits

1

Hardware

Specification

Description

Emissions

IEC 61000-6-4

ESD Immunity

EN 61000-4-2

Radiated RF Immunity

IEC 61000-4-3

EFT/B Immunity

IEC 61000-4-4

Surge Immunity

IEC 61000-4-5

Conducted RF Immunity

IEC 61000-4-6

Physical

Specification

Description

Enclosure Rating

IP20, NEMA/UL Open Type

Temperature

-20 to 70 °C

Earth Connection

Yes, terminal based

Dimensions (H x W x D)

5.86 x 1.33 x 4.56 in
149 x 34 x 116 mm

Power Requirements

Input: 10 to 36V DC

Power Consumption

85mA @ 24V => 2.04W

Power Connector

3-way terminal

Conductors

24 to 18 AWG

Certificaciones

Ex Certificate (ATEX Directive) 278,54 kB Última Modificación 04.09.2019
CB Safety 1,97 MB Última Modificación 04.09.2019
UL/cUL; Class1, Div 2 235,70 kB Última Modificación 04.09.2019
ODVA EtherNet/IP Declaration of Conformity 37,88 kB Última Modificación 04.09.2019