New Features
Fixes and changes
- Fixed - Implemented fixture for Security Vulnerability 8.1
Known Issues
- User cannot downgrade to any lower versions other than v1.14.153 due to security measures.
- Any Settings changes may stop Serial communication and requires re-enabling the protocol.
- Remote packet capture will not work during firmware upgrade.
- When IPsec is in use and the tunnel becomes disabled at one end, IPsec traffic should be stopped for 20 seconds before re-enabling the tunnel. To create a new IPsec tunnel, IPsec should be reconfigured on both ICX35-HWC endpoints.
- If the ICX35-HWC is being used in an OpenVPN setup, it will reboot if an unrecoverable error is detected.
- ICX35-HWC firmware can be updated via Belden Horizon or via the local User Interface (UI). It is recommended that ICX35-HWC firmware be updated via Belden Horizon. If firmware needs to be updated via the UI, then:
- The ICX35-HWC must be disconnected from the tunnel.
- If the ICX35-HWC is part of a PDN project in Belden Horizon, then the ICX35-HWC needs to be moved to a standard project prior to the firmware upgrade.